English
VHF NX2500
26
Press numeric key to enter the GROUP ID number (8-digits, the first digit must be
“0”). If a mistake is made, use the
◄
or
►
key to move back the cursor and reset
the number. Press
(ENT)
key and the Radio will ask for verification. Check that the
No. is correct and press
(ENT)
key once again to confirm your entry. To amend,
press
(CLR)
key to go back to main screen.
9.3
Set Manual Position/UTC
If the position of the vessel cannot be obtained from a GPS via the NMEA 0183 input,
this data can be entered manually.
Press
(MENU)
key to select the “POSITION/UTC” screen as below:
Use the numeric key to enter the required data, then press
(ENT)
key to accept the
position and time entered.
To toggle between N/S and E/W, use the “0” button
After 23 hours, if the Radio has not received any position data either manually or from
the NMEA input, then the position data will disappear from the screen, and it will show
“NO POSITION”.
9.4
Set the Directory
The DIRECTORY function is used to add, edit and delete a note (information about a
vessel) from the directory. The directory can store 20 notes, each note consists of
MMSI and vessel name, which can be recalled in the routine call screen. Press
(MENU)
key to select the “DIRECTORY” screen as below:
Содержание NX2500
