Nexus 21 L-75s, Инструкции по установке / Гарантия

Страница: 19 / 36

19
30
31
Assembling the TV Mounting System
For these steps you will need the following parts:

Actuation System

(2) Top Support Brackets

(2) Top Plates

Screen Back Plate

Center Cable Management Bracket

(4) 6 x 12 mm FHMS Screws

(4) 3/8” x 16 BHMS Screws

(8) 6 x 12 mm BHMS Screws

Small Hex Key

Large Hex Key
Step 30: Attach the Screen Back Plate to the Actuation Assembly using (2)
3/8” x 16 BHMS Screws. Mount the Screen Back Plate using the 4 holes
towards the middle of the Screen Support for now as adjustments will be
covered in the “ Adjustments ” section of the Instruction Manual on page (28).
Step 31: Using the remaining (2) holes on the Screen Back Plate, attach the Center
Cable Management Bracket using (2) 3/8” x 16 BHMS Screws. Ensure the larger
hole in the bracket is face down and to the left. See photo to right for reference.
Note: The Center Cable Management Bracket allows management of all of the TV
Cables in one bunch using the larger hole. The smaller holes act as anchors for zip
ties allowing for further cable management.