
PSH150
user manual rev4
Page 13/15
Mounting / Dismounting Instructions
For DIN rail fastening according to IEC 60715 TH35-7.5(-15)
Mounting as shown in figure, with input terminals on lower side, with suitable cooling and maintaining a proper distance between adjacent devices as specified in the I.S.
manual of each family.
DIN rail mounting:
1.
Pull down to release and unlock the
slide clamps.
2.
Tilt the unit slightly backwards.
3.
Fit the unit over the top edge of the rail.
4.
Slide it downward until it hits the stop.
5.
Press toward top the two slide clamps
for locking
1
2
3
3
4 & 5
DIN rail dismounting:
1.
Pull down to release and unlock the
slide clamps.
2.
Tilt the unit upward
3.
Unhook the unit from the rail
1 & 2
3