NextBase NBDVR612GW, Инструкция по эксплуатации

Страница: 16 / 45

IN VEHICLE INSTALLATION (CONTD.)
The above diagram is for
illustration purposes only.
5. Connect car power cable
Route the supplied car power cable (as shown) and connect it to the DC-IN socket of the mount.
The Dash Cam will automatically power on and start recording once power is available.
In some vehicles this will be when connections are made, for others the Dash Cam will
power on once the ignition has been turned on.
Should your vehicle not have a 12-24Vdc outlet, but does have a 5Vdc USB Outlet, this can be
used instead. Connect the USB cable supplied with your Dash Cam in place of the car power
cable.
You MUST however connect the USB cable to the mount, NOT directly to the Dash Cam
USB socket.
Note:
- Do NOT wire the Dash Cam directly to a 12V supply by cutting the cigarette plug
off the end of the cable, or damage will result.
- A Nextbase hardwire kit is available from your retailer. This connects directly to the
vehicle fusebox and hence leaves your cigarette socket available for Phone / Sat Nav
charging. The Nextbase hardwire kit includes the necessary 12-24Vdc to 5Vdc
convertor and battery protection circuitry.
12-24V DC
16