April 2018
CNC STONE SHARK | 15
Informational Resources
Next Wave Automation
www.nextwaveautomation.com
Manufacturer of the CNC STONE SHARK. The website
www.cncstoneshark.com
has software and
documentation downloads as well as other general product information.
For stone or mechanical related inquiries contact Stone Pro Equipment Co.
PH: 217- 536-6880 or Brad 618-322-0194 e mail:
CNC STONE SHARK Maintenance & Trouble Shooting Guide
Maintenance
It is best to vacuum away any dust, wipe down the bars and lubricate them using a dry lube spray.
You can find products like this at any good hardware shop, just make sure it is the dry type so it
doesn't attract dust and buildup. Spray the bars, bearings, and lead screws after each use to minimize
wear.
LCD not Connecting
•
Pendant Cable is not corrected properly (make sure connection is tight)
•
Nothing is touching the LCD Screen when powering up.
•
Pendant cable may be bad. Replace with a NWA approved cable.
Unable to read USB files
When your controller is unable to read your files from a NEW USB thumb drive, the issue is probably
that it is not formatted in a
FAT32 format.
The solution is to reformat the USB after copying any files
you want temporarily back onto your computer.
1.) Plug the USB drive into your computer.
2.) On the bottom left, right click on the Windows Icon then select "Open Windows Explorer"
Содержание CNC STONE SHARK
Страница 1: ...USER MANUAL...
