April 2018
CNC STONE SHARK | 8
CNC STONE SHARK Assembly Instructions
Unpack the CNC STONE SHARK machine and verify that all items are present and undamaged.
•
CNC STONE SHARK Frame
•
Pendant Cable
•
LCD Touch Screen Pendant
•
Transfer Cart (If purchased with machine)
•
Stone Shark Incremental Diamond Cutters (If purchased with machine)
Applying power to the Controller Interface.
•
Plug the CNC STONE SHARK Controller into a 20 amp / 120V AC wall outlet, power strip, or surge
protector.
•
You will hear a slight bumping noise coming from each of the motors when power is initially
supplied. This noise is momentary and will occur every time power is applied to the Controller
Interface.
Attaching air to the machine for the vacuum rails.
•
Once the machine is set upon a countertop you attach a standard quick connect air hose to the
fitting on the front right corner of the machine.
Supplying water to the machine.
•
There is a ¾” garden hose connection to
supply water to the machine. The water washes of all
the cuttings, cools the spindle motor, and cools the tool. (DO NOT OPERATE SPINDLE WITHOUT
WATER CONNECTED)
WARNING
:
The axis cable connectors should never be disconnected or re-connected while there is
power to the Controller Interface. Doing so can damage the stepper driver board inside the Controller
Interface.
The CNC STONE SHARK
machine’s hardware is now comple
tely setup and is ready for basic operation
testing. You must setup the CNC STONE SHARK software before you can completely test your CNC
STONE SHARK machine.
Содержание CNC STONE SHARK
Страница 1: ...USER MANUAL...