April 2018
CNC STONE SHARK | 9
Registering your CNC STONE SHARK
Once you power up your CNC STONE SHARK, you will see a screen like below. Press continue.
CNC STONE SHARK Welcome Screen
Next you will see your CNC STONE SHARK
’s serial number, and firmware information. Record this serial
number into your manual on Page 2 then press OK.
CNC STONE SHARK Serial Number
Go to
www.cncstoneshark.com
to
register. Once at the home page, choose “Registration,” Fill in the
items that are marked in red and then choose Save at the bottom. This will email an access code to the
email address provided in the registration form as well as display on your computer screen. (
Be sure to
check your spam box if you fail to see the code
)
If you received a registration error message there are a couple things to try:
1.
Verify you have an active internet connection.
2.
Use a different browser and register again
3.
Use a different computer to register.
Содержание CNC STONE SHARK
Страница 1: ...USER MANUAL...