NEXT pool ABRIBLUE IMM'Ax Скачать руководство пользователя страница 31

Страница: 31 / 44

31/36 - Installa

on instruc

ons for the IMM'Ax automa

c immersed safety cover

8. Test instruc

ons in the

event of a malfunc

The following list has been drawn up in order to help
diagnose and correct malfunc

ons that may occur during

installa

on. This guide is exclusively for the professional

authorised to install the cover in order to maintain the
validity of the guarantee. If, a

er having followed these

instructions, the cause of the malfunction has not been
found, the professional must contact the cover retailer or
manufacturer.

Read completely before carrying out the opera

ons. Refer

gures 25 and 27.

Turn the switch on the box to Off or "0" before each
connec

on, disconnec

on opera

on.

Check the condi

on and the correct

ghtening of the electric

connec

ons.

8.1 Checking the box

8.1.1 Check that the fuse and the thermal circuit breaker are

in good condi

on.

8.1.2 Check the power relay opera

on.

8.1.3 Disconnect the 2 wires connec

ng the box to the roller

motor from the "+" and "-" terminals.

8.1.4 Turn the switch on the box to On or "1"

8.1.5 Check that the command and power diodes are on when

the box is powered on.

8.1.6 Step by step, measure the presence of the indicated

voltage on the following terminals:

8.1.7 Electric box power supply test: 230 V AC (Alterna

ng) on

the "L" and "N" terminals of the electric box to which the
230 V is connected.

8.1.8 Transformer test: 20-24 V AC between the red and blue

jacks, and 10-12 V AC between the White and Blue jacks
exi

ng the transformer.

8.1.9 Motor terminal tests: 24 V DC between the "+" and "-"

terminals of the motor when ac

ng an open or a

close.

8.1.10 Terminal tests: If there is a malfunc

on check that the

cable terminals are correctly connected to the card.

8.1.11 If a voltage is not present or a value is di

ﬀ

erent, check

again making sure that the mul

meter

ps are in contact

with the terminals and that your mul

meter is calibrated

and on the correct measurement posi

on. A voltage that

is absent or di

ﬀ

erent from the indicated voltage indicates

that the tested component is defec

ve. Replace it or

request its return to AS POOL for analysis.

8.1.12 If the box is correctly supplied, the fuses in good

condi

on, and if the cover does not move, the box is no

longer opera

onal (this can be due to a power surge from

an incorrect connec

on, a thunder storm or a defec

component. The box must be returned to AS POOL for
analysis). If the cover moves more than 1 metre: the box
is working correctly.

Содержание ABRIBLUE IMM'Ax













































Результаты поиска

Содержание ABRIBLUE IMM'Ax

Отзывы:

Похожие инструкции для ABRIBLUE IMM'Ax

Бренды по названию

Популярные бренды

NEXT pool ABRIBLUE IMM'Ax, Руководство по установке

Результаты поиска

Содержание ABRIBLUE IMM'Ax

Отзывы:

Похожие инструкции для ABRIBLUE IMM'Ax

Бренды по названию

Популярные бренды