77
Only one stereo speaker has sound. Audio connections are loose.
Reconnect audio connections.
Check to make sure that no wires are frayed and no plugs
are bent or broken.
No power.
Power cord is disconnected.
Check to make sure that the RG2C is plugged into a live
electrical outlet.
Note: If the outlet is controlled by a wall switch, make sure
the switch is on.
VCR will not record.
VCR is on wrong channel.
See “Changing Channels” on page 21.
VCR is programmed incorrectly.
Refer to the VCR User’s Manual.
VCR is not connected properly.
See
“TV/VCR/Audio Connections” on page 65
.
VCR is connected with RCA jacks
and is not in correct mode.
Place the VCR on the LINE input. This can be
accomplished using the VCR menu or changing the VCR
channel until the display on the VCR indicates LINE.
Safety tab on tape is broken.
Use a new tape.
VCR will not play tapes.
TV on wrong channel for playback or
not using the correct input.
Tune TV to correct RF channel.
VCR is not connected properly.
See “TV/VCR/Audio Connections” on page 65.
Amber On-line LED.
You don’t have on-line services.
Call your Network Service Provider to initiate service.
Problem
Possible Cause
Try This
