56
1.
Locate the AC power cord.
2.
Plug the AC power cord into your home’s electrical AC power source.
3.
Locate the NETWORK IN input.
4.
There are two methods to make a NETWORK IN connection. Depending on how
your NSP has set up your configuration:
•
Using CAT 5 cable, connect the RJ-45 connector from your network wall jack
to the NETWORK IN input on the RG2C.
•
Using coax cable, connect the coax connector from your network wall jack to
the NETWORK IN input on the RG2C.
5.
On the back panel of the RG2C, locate the TEL LINE input.
6.
Using the existing telephone line, connect the RJ-11 connector from the primary
telephone jack to the TEL LINE input on the RG2C.
