75
T
ROUBLESHOOTING
This section describes what to do if your system is not working correctly. Study the fol-
lowing tables to find possible causes and solutions to the problem.
Problem
Possible Cause
Try This
Remote for primary TV doesn’t
work.
Dead batteries.
Change the batteries in your remote according to the
instructions on page
32
.
Obstruction between the remote and
the RG2C or IR Transmitter.
Make sure that nothing is on or blocking a clear line of
sight between the RG2C and the remote.
Remote does not accept
programming changes.
Weak batteries.
Replace batteries and reprogram.
Remote does not operate at
secondary viewing locations.
Weak or dead batteries.
Replace batteries.
Using wrong remote for that TV.
Check remote label to be sure you are using correct
remote control.
Obstruction between the remote and
the TV.
Make sure that nothing is on or blocking a clear line of
sight between the TV and the remote.
No sound.
MUTE is pressed on the remote
control.
Press MUTE on the remote to restore volume level.
TV code not programmed.
Refer to
“Programming the TV Code” on page 42
.
