29
R
ECORDING
Y
OUR
F
AVORITE
P
ROGRAMS
User Tip:
When you are con-
necting your RG2C to a VCR
that has more than one AV input,
be sure to plug into the default,
or primary input, which could be
called AV-1 or L-1.
Make sure that your NSP has connected the VCR to the RG2C. For examples of VCR
connections See “TV/VCR/Audio Connections” on page 65.
1.
Turn on your VCR.
2.
Load the tape you want to record on.
3.
Press GUIDE on your remote control.
4.
Highlight the channel you wish to record.
5.
Press SELECT.
6.
Start the record function on your VCR. (Consult your VCR user’s manual for the
correct procedure.)
User Tip:
If you don’t want
caller ID or other messages to
appear in a program you are
recording, turn the caller ID fea-
ture off. See User Tip on
page
27
.
S
ETTING
U
P
Y
OUR
RG2C T
O
S
TART
Y
OUR
VCR
Note:
The IR Blaster (see illustrations on
page 74
) must be installed and your
VCR(s) must be programmed into the RG2C by your NSP before the RG2C can
be programmed to record your favorite program. If the IR Blaster hasn’t been in-
stalled, contact your NSP.
