25
Video Instruction: bit.ly/nlrbuild
24
24
PARTS:
• • 2 x M8 16mm Bolts
• • 2 x M8 Washers
35
Align the holes on the NLR Tool Kit holder with T-Nuts previously installed in STEP 31a. Bolt through and secure with M8 Bolts
and Washers.
36
Your Setup is complete.
A:
Align end-cap to
corner of extrusion.
B:
Depress the centre
of the end-cap and align
the tab to the first hole.
Then align second tab
with the second hole.
C:
Finished End Cap.
YOUR COCKPIT IS COMPLETE
It’s time to install your electronics. If you have any questions about your setup you
can contact us directly at:
or you can join the
community on Discord or Facebook
bit.ly/nlr-discord
bit.ly/NLRowner
WARNING
Please do not use power tools for assembly as over tightening can damage your frame.
If in doubt consult the installation video or contact us on [email protected]
Please ensure T-Nuts are correctly placed within the extrusion.
Lay out and build the cockpit on a level surface.
If you require further support with your product please
contact our friendly team at:
ASSISTANCE
ASSEMBLY
VIDEO
bit.ly/nlrbuild
The GT Elite is a 2 person build.
Do not force parts together.
Avoid cross threading bolts.
