20
PARTS:
• • 1 x Shifter Mounting Corner
Brackets
• • 2 x M8 16mm Bolts
• • 2 x M8 Washers
30
Align the slots on the Upper Shifter Mounting Corner Bracket with the T-nuts previously installed in
step 28. Bolt through and secure with 2x M8 Bolts and Washers.
PARTS:
• • 1 x Shifter Mounting Corner
Brackets
• • 2 x M8 16mm Bolts
• • 2 x M8 Washers
29
Align the slots on the Bottom Shifter Arm Bracket with the T-nuts previously installed in step 28. Bolt
through and secure with 2x M8 Bolts and Washers.
Video Instruction: bit.ly/nlrbuild
21
PARTS:
• • 4 x T-Nuts
28
Install 4 x T-Nuts into the outer channel of the Left
or
Right Vertical extrusion.
Note:
Install T-Nuts on the
Left Vertical Extrusions for a
Left Side Shifter setup.
PARTS:
• • 1 x Shifter Arm
• • 4 x T-Nuts
31a
Install 4 x T-Nuts into the top and bottom side channels of the Shifter Arm.
PARTS:
• • 4 x M8 16mm Bolts
• • 4 x M8 Washers
26c
Align the first rear slot on the Seat Brackets with the T-Nuts previously installed in STEP 22. Bolt
through and secure with 4 x M8 Bolts and Washers.
Repeat
on Other
Side
PARTS:
• • 2 x M8 16mm Bolts
• • 2 x M8 Washers
27
Align the holes on the Butt-kicker pole with the T-Nuts previously installed in STEP 22. Bolt through
and secure with 2 x M8 Bolts.
SHIFTER INSTALLATION
INSIDE VIEW
OUTSIDE VIEW
OVER-HANGING SEAT BRACKET
(
FOR TALLER USERS
)
