PARTS:
• • 1 x HOTAS Outer Pole
• • 2 x M8 55mm Bolts
• • 2 x M8 Washers
• • 2 x M8 Flange Nuts
PARTS:
• • 1 x Centre Outer Pole
• • 2 x M8 55mm Bolts
• • 2 x M8 Washers
• • 2 x M8 Flange Nuts
• • 1 x Barrel Spacer
PARTS:
• • 1 x HOTAS Inner Pole
• • 2 x 20mm Knobs
PARTS:
• • 1 x HOTAS Plate
• • 3 x M8 55mm Bolts
• • 3 x M8 16mm Washers
• • 3 x M8 Flange Nuts
15
Align the mounting holes on the HOTAS Plate with the through holes on the HOTAS Inner Pole.
Bolt through and secure with 3 x M8 Bolts, Washers and Flange Nuts.
Video Instruction: bit.ly/nlrbuild
Make sure the U bolt is sitting properly in the
locking tab and pull the latch until its tight.
For a tighter lock, undo the latch, adjust the nuts
at the top of the latch and close it back again.
Hook the U-Bolt into the locking tab on the Pedal
Frame.
Gently place the Center Pole on top of the Pedal
Frame and make sure the latch is down.
13
Align the mounting holes on the HOTAS Outer Pole with the through holes on the Cross Member.
Bolt through and secure with 2 x M8 Bolts, Washers and Flange Nuts.
14
Align the threaded inserts on the HOTAS Inner Pole with the slot on the HOTAS Outer pole.
Bolt through and secure with 2 x Knobs.
13
16
A) Align the mounting holes on the Centre Outer Pole with the holes on the Pedal Frame.
B) Align the Barrel Spacer with the holes on the Centre Outer Pole. Bolt through and secure with 2 x M8 Bolts, Washers and
Flange Nuts.
12
OPTIONAL HOTAS INSTALL
17a
17b
17c
17d
A
)
B
)
A
)
B
)
