32
33
Video Instruction: bit.ly/nlrbuild
YOUR COCKPIT IS COMPLETE
It’s time to install your electronics. If you have any questions about your setup you
can contact us directly at:
or you can join the
community on Discord or Facebook
bit.ly/nlr-discord
bit.ly/NLRowner
DIRECT SHIFTER MOUNT
(OPTIONAL)
56:
Clip on all end caps
PARTS
End caps
C :
Line up large shifter arm with the desired position on the seat bracket
A :
Install T-Nuts into inside lower channel on large shifter arm
B :
Install end caps on the large shifter arm
PARTS
3 X regular T-nut
PARTS
2 x 40x80 end cap
PARTS
NIL
A:
Align end-cap to
corner of extrusion
B:
Depress the centre
of the end-cap and align the
tab to the first hole. Then
align second tab with the
second hole.
C:
Finished end-cap
