20
21
Video Instruction: bit.ly/nlrbuild
26:
Select your height then bolt through the shifter brackets into T-Nuts from step 25
27:
Bolt shifter extension plate to base (shifter side) using T-Nuts previously installed in step 1a or 1b
28:
Install 4 x T-Nuts into the inside channel of the shifter support bar (Longest sized shifter arm from contents page). Slide
them to the bottom of the bar to line up with the bracket from step
27 (red dots for T-nut placement)
PARTS
4 X M8 16mm bolt
4 X M8 washer
PARTS
4 X M8 countersunk bolt
PARTS
4 X M8 regular t-nut
Note:
Shifter arm bracket should
be angled towards the back
Note:
Add this plate to the same
side you installed the shifter bracket
30b:
Install 1 x T-Nut into each of the outside channels (highlighted in blue)
29:
Bolt through shifter arm bracket into previously installed T-Nuts from step 28
PARTS
4 X M8 16mm bolt
4 X M8 washer
PARTS
2 X M8 regular t-nut
Repeat
on other
side
30a:
Install 2 x T-Nuts into each of the top side channels (highlighted in blue)
PARTS
4 X M8 regular T-nut
INSIDE VIEW
OUTSIDE VIEW
