30
31
Video Instruction: bit.ly/nlrbuild
51:
Align cable clip with channel (cable clip can only be inserted from the top of the channel)
52:
Slide cable clip into place
PARTS
Cable Management Clip
PARTS
NIL
53:
Install 2 x T-Nuts into the lower side channel of the medium shifter support arm
54:
Bolt through tool holder using T-Nuts previously installed in step 53
55:
Insert tools into tool holder
PARTS
2 x regular T-nut
PARTS
2 X M8 16mm bolt
2 X M8 nylon washer
PARTS
NIL
Note:
Depress locater tab
on back side of clip
