F.
Hook the harness Attachment Clip onto the
VERSA
TETHER™
Catch.
Ensure shoulder
straps are of
equal length.
HOW TO USE
HOW TO USE
METHOD 1: USING LAP-SASH SEAT
BELT WITH CHILD SAFETY HARNESS.
Refer to the Harness instructions for
fitting the gated slide to the lap-sash seat
belt. Once fitted, position the gated slide
near to the child (under the armrest)
but not touching the child. Thread the
converted lap-sash seat belt through the
harness strap loops as shown left. Ensure
there are no twists in the harness, cross
strap and seat belt.
Important Note:
Some vehicle seat belts
are too short and you may experience
some difficulty fitting the converted
lap-sash around your child. If so, adjust
the gated slide nearer to your child,
(ensure the slide does not touch your
child). This may provide more belt length
to fit your child, but if the belt still will
not fit, try another location in the vehicle,
e.g.. side seat. If the vehicle seatbelts are
still too short, then contact the vehicle
manufacturer for advice on longer seat
belts.
Gated Slide
Faces
towards
child.
Outer
strap.
Inner
strap.
Position the
Gated Slide
under the
armrest but
not touching
the child.
22
23
NOTE:
The shoulder straps must be in the slots which are nearest to the child’s
shoulder’s but not lower than the child’s shoulders. As there are only one set of
slots in the cover the shoulder strap slots will be correctly positioned provided the
headrest is set to the correct height for your child (refer to page 11).
USE WITH CHILD HARNESS
USE WITH CHILD HARNESS
