background image

18

HOW TO USE

19

HOW TO USE

INSTALLING CHILD HARNESS WITH EXTENSION STRAP INTO VEHICLE

An adjustable extension strap is supplied with the Child Harness. Hook the Child 

Harness clip first onto the extension strap catch, then hook the extension strap 

hook onto the

 VERS

ATETHER™

Catch on the Booster Seat’s upper anchorage 

strap as shown below. Ensure that none of the straps are twisted or catching on 
sharp edges. Tighten the Booster Seat’s upper anchorage strap (refer to page 12) 
then remove excess slack from the extension strap by pulling the adjuster strap as 
illustrated below.

1.

 Attachment clip from the Child Harness

2. 

VERSA

TETHER™

 Catch

3.

 Booster Seat Attachment Clip 

4.

 Anchor Fitting in the Car 

5.

 Adjustable Extension Strap 

6.

 Extension Strap Catch

7.

 Extension Strap Attachment Clip

To lengthen the Adjustable Extension strap rotate the 
adjuster and pull the main strap.

Pull to remove 
slack

Pull to 
lengthen

Rotate the 
Adjuster to 
lengthen

2

Pull to 
remove 

slack

Attachment Clip attaches to 
the 

VERSA

TETHER™

 Catch

5

6

3

3

7

1

4

7

CHOOSING METHOD OF INSTALLATION 

The Harness can be installed using either of the following methods.

Method 1 - 

Using a lap-sash seat belt in conjunction with Gated Slide (provided 

with the Child Harness) to convert to a lap belt.

Method 2 -

 Using lap seat belt. 

Before installing the Harness determine which method of installation is required 
and follow instructions carefully.
REFER TO THE CHILD HARNESS INSTRUCTIONS FOR FULL DETAILS ON HOW TO USE 
AND INSTALL THE CHILD HARNESS

Hook attachment clip to the 

anchor fitting in the Car.

INSTALLING THE HARNESS

 

Decide which seating position you are going to 
use and which seat belt type is installed in that 
position. If using a lap-sash seat belt then a Gated 
Slide must be used.

A.

 Ensure the headrest is set to the correct 

height for your child (See page 11).

B. 

Hook the attachment clip to the anchor 

fitting and tighten (refer page 12). Make sure 

to remove any twists from the upper anchorage 
strap. THIS UPPER ANCHORAGE STRAP MUST 
ALWAYS BE FITTED WHEN THE CHILD RESTRAINT 
IS USED IN A VEHICLE. 

USE WITH CHILD HARNESS

USE WITH CHILD HARNESS

Содержание 4200/A/2010 Series






















Отзывы: