Next generation 4200/A/2010 Series Скачать руководство пользователя страница 11

20

21 

HOW TO USE

HOW TO USE

C.

 Lengthen the Child 

Harness using the adjuster 
under the cover (see the 
Child Harness instructions 
on the adjustment method). 
Press the Adjuster button 
(1) on the adjuster and pull 
the shoulder strap (2)

Left hand Strap

Adjuster under 
cover

Attachment Clip

Cross Strap

1

2

D. 

Feed the left hand harness strap and 

attachment clip through the right hand slot of the 
Booster Seat cover.

Pass the left 
hand Strap and 
Attachment Clip 
through the right  
hand slot

E. 

Then feed the left hand harness 

strap back through the left hand slot 
in the Booster Seat cover, keeping 
the attachment clip at the back of the 
Booster Seat.

Feed left hand Child 
Harness Strap & Cross 
Strap through left hand 
slot of Booster Seat 
cover.

Hook the Attachment Clip onto 

VERSA

TETHER™

 Catch

 

The harness shoulder strap will now be around the neck of the headrest.

Rear view of Booster Seat showing harness straps 
feeding through the headrest cover slots

Neck

Child Harness 
Straps

Slots in cover

Booster 
Seat’s upper 
anchorage 
strap

USE WITH CHILD HARNESS

USE WITH CHILD HARNESS

Содержание 4200/A/2010 Series






















Отзывы: