5
Attach Cables
Connect all necessary communication cables (Fibre Channel, Ethernet, expansion, serial) to the
appropriate connectors on the RAID Controller. See the
Nexsan SATABeast/SASBeast/SATABeast Xi
Installation and Maintenance Manual
.
Apply Power and Turn On
Using the two supplied power cords, connect each PSU to main power, making sure to fold down the
retaining clip over each one. Then turn the unit on by switching each PSU’s power switch to the on (
|
)
position.
Register and Configure the Unit
The Nexsan Product ID is located on the bottom left of the rear panel. Go to
http://register.nexsan.com
to register your product.
Once the unit has finished booting up, follow the instructions in
Chapter 1
,
Basic Setup
of the
Nexsan
User Manual
to get your SATABeast/SASBeast system up and running.
Serial
Port
Ethernet
Ports
Fibre
Channel Ports
Expansion
Ports