Nexo NXAMP4x1mk2 Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 70

background image

OPTIONS

NXAMPMK2 USER MANUAL

PAGE 35 / 70

Since the introduction of the NXDT104mk2 (Dante

TM

) and NXAE104 (AES/EBU), a network switch is

included on the extension card connecting the amplifier directly to the network. So, with any of these 2 cards,
the card has an IP address and the NXAMPmk2 has also an IP address.

For example, with NXDT104mk2 card, the I

P address on Dante™ Controller is the card IP address (used

for audio network), and the IP on NeMo is the amplifier IP address (used for remote-control).

DEVICE ID

Here can be modified the NXAMPmk2 Device ID.

The Device ID is composed of one ‘Y’ letter followed by 3 characters, with each character between 0 and 9
(for digits) or between A and F (for letters), so for example “Y01 ”.
The Device ID is always included in front of the Dante™ card name on the Dante™ network. On the following

Dante™ Controller screenshot

, we can see that the Dante™ card name is “Y01 -NEXO-NXAMP4x4mk2-

062c60”.
The Device ID can be edited on Dante™ Controller by editing it directly in the Dante™ card name.

NAME

Here can be modified the NXAMPmk2 name, used and displayed by the remote-control software (NEXO
NeMo).

NB:

The NXAMPmk2 name is not the same than the Dante™ card name, but a function is available in NeMo

to sync them on request (see NeMo user guide).

MODE

Here can be modified the NXAMPmk2 IP mode. 2 modes are available: “Static” or “DHCP AutoIP”.

•

“DHCP AutoIP” mode is the default one and the recommended one to get the network working easily.
When the amplifier starts, it asks an IP address on the network using a DHCP request. If no DHCP
server answers by giving an address, the amplifier switches automatically in Auto-Addressing mode and
takes an IP address in the auto-assign form

“16 .25 .xxx.xxx”.

«
...
33
34
35
36
37
...
»

Содержание NXAMP4x1mk2







































































Отзывы:

Нет отзывов

Похожие инструкции для NXAMP4x1mk2

Бренд: Farris Engineering Страницы: 12

Бренд: Eastern Times Technology Страницы: 4

Бренд: Vacon Страницы: 18

Бренд: Baader Planetarium Страницы: 7

Бренд: Beaphar Страницы: 2

Бренд: Banner Страницы: 15

Бренд: bar Страницы: 2

Бренд: ICP DAS USA Страницы: 166

Бренд: ICP DAS USA Страницы: 64

Tunnel Master Jr

Бренд: ICS Страницы: 83

PROFIBUS PROFI-2510

Бренд: ICP DAS USA Страницы: 4

Бренд: ICP DAS USA Страницы: 40

Бренд: Lawler Страницы: 4

Бренд: QTP Страницы: 2

Бренд: Oceanic Systems Страницы: 8

Бренд: Watlow Страницы: 59

Tekmar WiFi Snow Melting Control 670

Бренд: Watts Страницы: 48

Бренд: J+J Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды