12
Assembly Instructions
Step 5. Back panel assembly
a). Loosen, but do not remove 7 screws
which are pre-assembled on the bottom cart
legs and bottom panel(4 screws on the left
and right back cart legs and 3 screws on the
bottom panel).
b). Attached back panel ( L) by aligning the
holes on the back panel with screws in the
leg, then tighten the 7 screws that were
loosened in step a). As shown in Fig. 6.
c). Loosen, but do not remove the 4 screws
which are pre-assembled on the upper cart
legs as shown in Fig. 7.
d). Attach the other piece of back panel ( L)
by aligning the holes in the back panel with
screws in the leg, then tighten the four screws
that were loosened in step c). As shown in Fig.
7.
Fig. 6
Fig. 7
L
L
C
B
A
D
E
D
E
C
B
