18
Assembly Instructions
Step 12. Chimney Assembly
a). Insert the Charcoal Chimney (AD)
from lid inner to outside, the chimney seat is
closed to the lid inner, then attach it onto the
hood by using two 5/32-in. x 10-mm truss
head screws with locking washers (BB) as
shown in Fig. 18.
b). Attach the chimney lid (AE) onto the
Charcoal Chimney (AD) by using one chimney
lid spring (HH), one ¼-in flat washer (FF) and
one ¼-in nut (CC). As shown in Fig. 19.
2 x BB
Fig. 18
Fig. 19
AD
AE
1
×
CC
1
×
FF
AD
Note: ¼-in flat washer (FF) goes between ¼-in
nut (CC) and Chimney lid spring (HH).
1
×
HH
