10
Assembly Instructions
Fig.1
I
H
G
16x AA
Fig. 2
A
A
E
D
A
F
Step 2. L shape bracket assembly
a). Loosen, but do not remove the screws that are
pre-assembled on the bottom panel (A), align
the holes on the bottom panel (A), then attach
the L shape bracket (F) onto the bottom panel
(A) by aligning the holes.
b). Tighten the two screws that were
loosened above. As shown in Fig. 2.
Step 3. Cart leg assembly
Note: The back legs are the two that have 4 side
screws on the inside of each leg and the front legs
have two screws the face to the back of the grill
for attaching the side panels.
a). Loosen, but do not remove the 4 screws that
are pre-assembled on the bottom panel (A),
align the holes on the left cart leg, front (D) and
left cart leg, back (E), then place the cart legs
onto the bottom panel by aligning the screws
that were loosened in the bottom panel (A) as
shown in Fig. 3.
b). Tighten the screws that were loosened above.
Fig. 3
Tool Required: Philips Screwdriver
1. Caster Assembly
a). Mount the casters onto the bottom panel (A) using
sixteen 1/4-in. x 15-mm truss head screws with
locking washers (AA) and sixteen ¼-in flat washers
(FF).
b). The swivel caster with brake (H) should be
positioned under the left rear of the cart bottom
and the swivel caster (G) should be positioned
under left front as shown in Fig. 1.
d). The two stationary casters (I) should be positioned
under the right side.
e). Turn over the bottom panel for assembling casters.
16x FF
