28
Step 1. Remove the side burner lid, and side burner base
1.
Use a screwdriver to disassemble the two screws on either side.
2.
Remove the screws on the base, all together 4 screws, 2 on each side
Step 2. remove the LP orifice and reattach the NG orifice
1.
Turn back and keep the side burner base as figure
2.
Use the wrench that attached in the hardware package, the small 6.1mm wrench hold to the
orifice and the bigger 18mm wrench used to hold the orifice connector, remove the LP
orifice
Step 3: replace the NG orifice and reassemble the side burner lid
1.
Reset the NG orifice (1.7mm) use the same method as step 2
2.
Reset the side burner base, the hinge rod and the side burner lid.
Содержание 720-0536
Страница 53: ...53...
