26
Trouble Shooting
continued
PROBLEM
SOLUTION
When attempting to light my grill, it will not
light immediately.
• Make sure you have a spark while you are trying to light
the burner (if no spark)
• Ensure that the wire is connected to the electrode
assembly.
• Clean wire (s) and / or electrode with rubbing alcohol
and a clean swab. Wipe with a clean cloth.
• Check to see if the other burners operate. If so. Check the
gas orifice on the malfunctioning burner for an obstruction.
Rotisserie burner will not light.
• Check to see if debris is blocking the electrode.
• Check to see if there is a spark that jumps to the burner
from the electrode. If no spark is seen, check the battery
located inside the igniter box.
• Does the infrared back burner light when attempting to
light with a match ? If not, check to ensure the gas is on.
Regulator makes noise.
• Vent hose on the regulator may be plugged or regulator
may be faulty.
• Ensure the vent hole on the regulator is not obstructed.
Clear the hole, close the gas control valves. Wait ten
minutes and re-start.
• Check your flames for proper performance. If the flames
are not correct, replace regulator.
Full size cover does not fit the grill.
• Cover may be incorrect for your grill. It may be a tight fit.
Ensure the cover is the correct length for your grill.
Measure it left to right. Compare to the grill’s
measurement.
• Compare the location and size of the hood portion of the
cover to your grill.
• Spread the cover and allow it to relax, preferably in warm
sunlight or in a warm room.
• For grill with a side shelf bunch the cover like a sock, put
on left to right.
