20
Sear Burner Lighting Illustration:
Push and turn the Sear Burner knob slowly
to IGNITE/ON. If burner does not light up,
turn the knob to OFF and repeat lighting
procedure. If burner does not light up after
second attempt, turn the knob OFF, wait 5
minutes and repeat lighting procedure or
light by match.
Main & Side Burner Lighting Illustration:
Step 1.
Make sure the Lid is open
Step 2.
Push and turn main burner knobs to “IGNITE/HI” position.
Pilot torch will light. Hold for 3-4 seconds until burner is lit.
Step 3.
You may need to try 3 or 4 times to light the burner. After
the burner is lit, adjust the knob as desired.
Lighting Illustration