14
ASSEMBLY INSTRUCTIONS
Step 5: Replace “U” brackets with 4(four) Step 6: Align & tighten knob seat &valve
Screws(
DO NOT TIGHTEN
) stem with 2(two)screws&split lock
Note:(Make sure hose is not bent)
as shown below.
Knob Seat
Valve Stem
Step 7;Tighten all 4(four) screws on the “U”
Step 8: Place knob on valve stem and secure
the ignition wire on to valve.
brackets on the burner, then connect
with the wrench tool.
Ignition wire
(wrench tool enclosed in bag)
**Important Note! Make Sure Side Burner Hose Is not Bent**