N560 series H/W Installation Guide
NexComm Systems, Inc. 6 PAGE
1
Introduction
This document provides the procedures for installing the NexComm Systems’ N560 series.
1.1
N560 series is..
N560 series, 2BASE-TL EFM EDD (Ethernet Demarcation Device) with two 100BASE-FX SFP ports,
extends the reach of Ethernet services using bonded copper pairs and fiber optic cables. Designed with
standard-based EFM technology (2BASE-TL), N560 series cost-effectively allows service providers and
enterprises to deliver Ethernet services with symmetrical bandwidth at rates up to 60 Mbps via copper and
100 Mbps via fiber. The delivery of Ethernet services with N560 series can be made quickly by using
existing copper plant.
1.2
Rules of Naming Models
N 5 6 x
□
□
□
W e t t i n g C u r r e n t : W (supported)
: blank (not supported)
D y i n g G a s p : D (supported)
: blank (not supported)
100B-FX SFP Port : F (Support 2 Ports)
: blank (not supported)
2BASE-TL PME : 4 (supports up to four pairs)
: 2 (supports up to two pairs)
1.3
List of the Models of N560 series
Table 1-1 lists the models of N560 series. For convenience of calling N560 series in certain groups, for
example, with or without SFP ports, the convention of referring is given in Table 1-1.
NOTE:
In addition to Table 1-1, N560 series can be classified according to its 2BASE-TL features. For
instance, “ N564F / N564 “ may refer the group of models which have four 2BASE-TL PMEs. Similarly,
“ N562F / N562 ” may have two.
Conventions
Model
Options
100B-FX SFP 2BASE-TL PME Features
D y i n g G a s p
W e t t i n g C u r r e n t
N56xF
(supported)
unsupported N560F
2 pairs ( p0, p3 )
N562F
4 pairs ( p0, p1, p2, p3 )
N564F
