N560 series H/W Installation Guide
NexComm Systems, Inc. 8 PAGE
2
Front / Rear Panel Features
Figure 2-1 shows the front panels of N560 series. In addition, it describes each part’s name.
< Figure 2-1 > N560 series Front LEDs and Rear Ports
2.1
Power Connector, Power Status LED and Reset Button
2.1.1
Type of Power Supply
N560 series utilizes DC power. Conn100 ~ +250V AC to the connector of DC Adaptor which
supplies 5V DC 3A by a power cord enables it to boot.
2.1.2
Power Status LED
This LED shows the status of power supply. Table 2-1 summarizes the indication of the LED.
LED
POWER STATUS
GREEN
ON
Normal
OFF
Power not being connected or abnormal operation of power circuit
YELLOW
ON
DC Adaptor Power Supply Abnormal(N5x x
□
D
□
m o d e l o n l y )
OFF
DC Adaptor Power Supply Normal
< Table 2-1 > Indication of Power Status LED
2.1.3
Reset Button
This is a button to reset the system. With a pointed tool, such as a ball-pen, user may reach to the button.
The system may reset, once a user clicks the button. Added to this, if a user keeps pressing the button
until all the 2BASE-TL LEDs blinks five times, the system restores to the manufacturing configuration.
