NexComm Systems N560 series H/W, Руководство по установке

Страница: 11 / 25

N560 series H/W Installation Guide
NexComm Systems, Inc. 11 PAGE
LAN Port (RJ-45) Pin-outs
Pin Signal Description
1 RX+ / TX+ Input / Output
2 RX- / TX- Input / Output
3 TX+ / RX+ Input / Output
6 TX- / RX- Input / Output
< Figure 2-4 > Pin Assignment for LAN Port Connector
2.5 2BASE-TL Port
2.5.1 Connector Part
N560 series has 2BASE-TL interface provided with an RJ-45 connector. For N564F / N564, 4 pairs of
telephone lines can be bonded to support 2BASE-TL communication. For N562F / N562, 2 pairs can be
used.
Table 2-5 lists this.
Models Available Telephone Line Pairs ( available PMEs )
N564F / N564 4 pairs ( p0, p1, p2, p3 )
N562F / N562 2 pairs ( p0, p3 )
< Table 2-5 > Available Telephone Line Pairs for Each Model of N560 series
Note that each PME uses different pins in the RJ-45 connector:
- p0 uses 4th and 5th pin of the RJ-45 connector
- p1 uses 7st and 8nd pin of the RJ-45 connector
- p2 uses 3rd and 6th pin of the RJ-45 connector
- p3 uses 1th and 2th pin of the RJ-45 connector
Also, N564F / N564 and N562F / N562 support Dual Interface Over DSL.
Table 2-6 lists this.
Models Dual Interface Over DSL Ports
N564F / N564 S0 port ( p0, p1), S1 port( p2, p3 )
N562F / N562 S0 port ( p0), S1 port( p3 )
< Table 2-6 > Available Dual Interface Over DSL for Each Model of N560 series