manualshive.com logo in svg

Nexcom NSA 7131, Руководство пользователя

Поделиться
Скачать
Nexcom NSA 7131 Скачать руководство пользователя страница 54

Copyright © 2018 NEXCOM International Co., Ltd. All Rights Reserved.

40

NSA 7131 User Manual 

Chapter 4: BIOS Setup

Socket 0 PcieD00F0 - Port 0/DMI

Save & Exit

Advanced

Security

Boot

Main

Version 2.17.1249. Copyright (C) 2017 American Megatrends, Inc.

Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit

Socket 0 PcieD00F0 - Port 0/DMI

------------------------------------------------------------------------------------

Link Speed

Override Max Link Wid

PCI-E Port DeEmphasis

PCI-E Port Link Status

PCI-E Port Link Max

PCI-E Port Link Speed

IntelRCSetup

[Auto]

[Auto]

[-6.0 dB]

Linked as x4

Max Width x4

Gen 2 (5.0 GT/s)

Link Speed

Configures the link speed of the PCIe port.

Override Max Link Width

Configures the link speed to override the max link width set by bifurcation.

PCI-E Port DeEmphasis

Configures the level of the PCIe port de-emphasis.

Socket 0 PcieD01F0 - Port 1A to Socket 0 PcieD03F2 - Port 3C

Save & Exit

Advanced

Security

Boot

Main

Version 2.17.1249. Copyright (C) 2017 American Megatrends, Inc.

Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit

In auto mode the BIOS will 
remove the EXP port if there 
is no device or errors on that  
device and the device is not HP 
capable. Disable is used to 
disable the port and hide its 
CFG

Socket 0 PcieD0xFx - Port xx

------------------------------------------------------------------------------------

PCI-E Port

PCI-E Port Link

Link Speed

Override Max Link Wid

PCI-E Port DeEmphasis

PCI-E Port Link Status

PCI-E Port Link Max

PCI-E Port Link Speed

IntelRCSetup

[Auto]

[Enable]

[Auto]

[Auto]

[-6.0 dB]

Link Did Not Train

Max Width x8

Link Did Not Train

PCI-E Port

Enables or disables the PCIe port. In auto mode the BIOS will remove the 

EXP port if there is no device or errors on that device and the device is not 

HP capable. Disable is used to disable the port and hide its CFG space.

PCI-E Port Link

Enables or disables link training of the PCIe port.

Link Speed

Configures the link speed of the PCIe port.

Override Max Link Width

Configures the link speed to override the max link width set by bifurcation.

PCI-E Port DeEmphasis

Configures the level of the PCIe port de-emphasis.

Содержание NSA 7131
































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды