Nexcom NSA 7131 Скачать руководство пользователя | Manualshive

Страница: 4 / 63

background image

Copyright © 2018 NEXCOM International Co., Ltd. All Rights Reserved.

iv

NSA 7131 User Manual

Preface

P

refaCe

Copyright

This publication, including all photographs, illustrations and software, is
protected under international copyright laws, with all rights reserved. No
part of this manual may be reproduced, copied, translated or transmitted in
any form or by any means without the prior written consent from NEXCOM
International Co., Ltd.

Disclaimer

The information in this document is subject to change without prior notice and
does not represent commitment from NEXCOM International Co., Ltd. However,
users may update their knowledge of any product in use by constantly checking
its manual posted on our website: http://www.nexcom.com. NEXCOM shall
not be liable for direct, indirect, special, incidental, or consequential damages
arising out of the use of any product, nor for any infringements upon the rights
of third parties, which may result from such use. Any implied warranties of
merchantability or fitness for any particular purpose is also disclaimed.

Acknowledgements

NSA 7131 is a trademark of NEXCOM International Co., Ltd. All other
product names mentioned herein are registered trademarks of their
respective owners.

Regulatory Compliance Statements

This section provides the FCC compliance statement for Class A devices and
describes how to keep the system CE compliant.

Declaration of Conformity

FCC

This equipment has been tested and verified to comply with the limits for
a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference
to radio communications. Operation of this equipment in a residential area
(domestic environment) is likely to cause harmful interference, in which
case the user will be required to correct the interference (take adequate
measures) at their own expense.

CE

The product(s) described in this manual complies with all applicable
European Union (CE) directives if it has a CE marking. For computer systems
to remain CE compliant, only CE-compliant parts may be used. Maintaining
CE compliance also requires proper cable and cabling techniques.

«
...
2
3
4
5
6
...
»

Содержание NSA 7131
































































Отзывы:

Нет отзывов

Похожие инструкции для NSA 7131

Бренд: Xerox Страницы: 40

UniServer T1100 G3

Бренд: H3C Страницы: 66

UniServer R6900 G3

Бренд: H3C Страницы: 214

UniServer R6700 G3

Бренд: H3C Страницы: 151

UniServer R4900 G5

Бренд: H3C Страницы: 16

Digital Audio Server

Бренд: CAAS Audio Страницы: 23

DiskStation Series

Бренд: Synology Страницы: 6

Бренд: Acer Страницы: 20

Бренд: Acer Страницы: 20

AR360 F1 Series

Бренд: Acer Страницы: 20

Бренд: Acer Страницы: 18

AR380 F1 Series

Бренд: Acer Страницы: 17

Бренд: Acer Страницы: 134

Бренд: Acer Страницы: 23

AT350 F1 Series

Бренд: Acer Страницы: 23

Бренд: Acer Страницы: 160

Бренд: Acer Страницы: 95

AT350 F2 Series

Бренд: Acer Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды