manualshive.com logo in svg

Nexcom NSA 7131, Руководство пользователя

Поделиться
Скачать
Nexcom NSA 7131 Скачать руководство пользователя страница 47

Copyright © 2018 NEXCOM International Co., Ltd. All Rights Reserved.

33

NSA 7131 User Manual 

Chapter 4: BIOS Setup

PCI Express Settings

Advanced

Version 2.17.1249. Copyright (C) 2017 American Megatrends, Inc.

Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit

Enables or Disables PCI Express 
Device Relaxed Ordering.

PCI Express Device Register Settings

Relaxed Ordering

Extended Tag

No Snoop

Maximum Payload

[Disabled]

[Disabled]

[Enabled]

[Auto]

Relaxed Ordering

Enables or disables the PCI Express device’s relaxed ordering.

Extended Tag

When this function is enabled, it allows a device to use 8-bit tag field as a request.

No Snoop

Enables or disables the PCI Express device’s no snoop option.

Maximum Payload

Selects the maximum TLP payload size of the PCI Express devices.

Network Stack Configuration

This section is used to configure the network stack.

Advanced

Version 2.17.1249. Copyright (C) 2017 American Megatrends, Inc.

Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit

Enable/Disable UEFI Network 
Stack

Network Stack

[Disabled]

Network Stack

Enables or disables UEFI network stack.

Содержание NSA 7131
































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды