manualshive.com logo in svg

Nexcom NSA 7131, Руководство пользователя

Поделиться
Скачать
Nexcom NSA 7131 Скачать руководство пользователя страница 43

Copyright © 2018 NEXCOM International Co., Ltd. All Rights Reserved.

29

NSA 7131 User Manual 

Chapter 4: BIOS Setup

Serial Port Console Redirection

This section is used to configure the serial port that will be used for console
redirection.

Advanced

Version 2.17.1249. Copyright (C) 2017 American Megatrends, Inc.

Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit

Console Redirection Enable 
or Disable

COM0

Console Redirection

Console Redirection Settings

COM1

Console Redirection

Console Redirection Settings

COM2

Console Redirection

Console Redirection Settings

Legacy Console Redirection

Legacy Console Redirection Settings

Serial Port for Out-of-Band Management /       

Windows Emergency Management Services (EMS)

Console Redirection

Console Redirection Settings

[Enabled]

        

[Disabled]

[Disabled]

[Enabled]

Console Redirection

Enables or disables the console redirection.

►

►

►

►

►

Serial Port 2 Configuration

This section is used to configure serial port 2.

Serial Port

Enables or disables the serial port. 

Change Settings

Selects an optimal setting for the Super IO device.

Advanced

Version 2.17.1249. Copyright (C) 2017 American Megatrends, Inc.

Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit

Enable or Disable Serial Port
(COM)

Serial Port 2 Configuration

Serial Port

Device Settings

Change Settings

[Enabled]

IO=2E8h; IRQ=7;

[Auto]

Содержание NSA 7131
































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды