14
SECTION 5
Service and Maintenance
Cleaning the Nexalin ADI System
1. Inspect the patient cable, lead wires, connectors, and electrode clips for visual damages. If
necessary, replace with specified accessories listed in Section 6 - Nexalin ADI Device Accessories.
2. Never spray any liquid directly onto a Nexalin ADI Device or any of its accessories. The Nexalin ADI
Device and its accessories are not designed to withstand directly-applied liquids.
3. Following clinical procedures, cleanse your hands thoroughly before cleaning or disinfecting the
Nexalin ADI Device and/or its accessories.
4. Use a generic disinfectant cleaning agent to clean and disinfect the Nexalin ADI Device and system
accessories, as needed.
5. Spray the disinfectant cleaner on a clean cloth or paper towel until the towel is moistened, or use a
pre-moistened disinfectant towelette.
6. Thoroughly wipe down the patient cable and each of the lead wires.
7. Thoroughly wipe down each electrode clip. Lift the clamp to clean the jaws of the electrode clip, as
well as the clamp itself.
8. Thoroughly wipe down the exterior of the Nexalin ADI Device.
Note: There are no serviceable parts in the Nexalin ADI Device.
