6
SECTION 4
Nexalin ADI System Operations
Instructions for the Patient
The patient should be in a relaxed state, both mind and body, to receive the maximum benefit from a Nexalin
ADI Therapy session.
1. Encourage the patient to use the restroom prior to the therapy session.
2. Personal items should be stored away from the patient during the therapy session.
3. All mobile phones should be in the “OFF” position.
4. The patient should sit or lie as still as possible to avoid disconnecting the electrodes.
5. It is recommended that the patient attempt to rest and/or sleep during the therapy session.
A. It has been reported by many that they have fallen into REM type sleep during the Nexalin
treatment
6. Demonstrate to the patient how to request NCT technician attention if they need assistance
or experience discomfort.
a. A buzzer should be connected to a technician’s location is best.
b. Providing a bell or other ringer that can be heard at the technician’s desk can also be an
opiton.
b. Show them how in an emergency they can simply remove the cable, hold it in hand, and
leave the treatment area.
7. Instruct the patient to gently press on any electrode that begins to come loose during a treatment.
8. Inform the patient audible tones will sound during the final 10 seconds at the end of the therapy
session.
Powering On the Nexalin ADI Device
ON/OFF Switch (Green Indicator LED)
SYSTEM ERROR (Red Indicator LED)
CHECK ELECTRODE (Yellow Indicator LED)
BATTERY (Amber Indicator LED)
Figure 6. Front panel of a Nexalin ADI Device
1. Press the ON/OFF switch – A green indicator LED on the switch will illuminate when the Nexalin
ADI Device has power.
2. Observe the diagnostic Self-Test – During this test, a low-level beep is heard and three different
LEDs will briefly flash.
3. The CURRENT LEVEL window and session TIME window will briefly light up – (displaying 8.8.8.8.
