NewTom GiANO HR Скачать руководство пользователя страница 85

Страница: 85 / 88

OPERATOR'S MANUAL

10.1.8. TRANSLATION

As regards the translation of this licence into other languages it remains understood that, should any inconsistencies

arise regarding interpretation, the Italian version shall prevail.

10.1.9. SOFTWARE COMPLIANCE WITH THE REGULATIONS IN FORCE

If the Author declares compliance of the Software with specific laws or regulatory standards, such compliance shall

be deemed valid on the date the Author places the product on the market.

It being evident that legislative or regulatory modifications are always possible as are changes in the interpretation of

regulations, and also considering that any modifications and changes would make the Software in possession of the

User no longer compliant to such regulations, the User is obliged to from time to time ascertain whether the use he

intends to make of the Software is legitimate (or in any case still legitimate) and abstain from using the Software in

case of doubt about compliance with the law for the use he intends to make of the Software, promptly notifying the

Author of the circumstances.

Содержание GiANO HR

























































































Результаты поиска

Содержание GiANO HR

Отзывы:

Бренды по названию

Популярные бренды

NewTom GiANO HR, Руководство пользователя

Результаты поиска

Содержание GiANO HR

Отзывы:

Бренды по названию

Популярные бренды