NewTom GiANO HR Скачать руководство пользователя страница 28

Страница: 28 / 88

OPERATOR'S MANUAL

4.2. CONTROL CONSOLE

The control console is a software allowing to manage

the operating functions of the X-ray device.

The operator can use the console directly from the

connected PC, from an iPad with dedicated app and

from the touch console onboard the machine (optional).

The operator can use the control console to select and

set the examination in a guided manner, as described in

details inside the following dedicated chapters.

4.3. PUSHBUTTON PANEL ON TELE-X-RAY ARM

For all the units equipped with tele-X-ray arm, such arm features a control panel which allows moving the system

vertically.

A) Column upward movement

B) Column downward movement

4.4. X-RAY EMISSION REMOTE CONTROL

The system is equipped with a remote control to enable the X-ray emission.

The remote control includes:

1) A confirmation button for the X-ray emission

2) Two LED lights

Green (machine ready to start the emission)

Yellow (X-ray emission in progress)

When the system enters the Ready status (READY), the X-ray emission can be performed (green LED steady on) by

pressing and holding the remote control button for the entire duration of the examination.

The execution of the examination is characterised by the yellow LED turning on on the remote control and by the

simultaneous emission of an acoustic signal.

Button pressed

Button released

Releasing the button before the examination is completed will stop the image acquisition.

Содержание GiANO HR

























































































Результаты поиска

Содержание GiANO HR

Отзывы:

Бренды по названию

Популярные бренды

NewTom GiANO HR, Руководство пользователя

Результаты поиска

Содержание GiANO HR

Отзывы:

Бренды по названию

Популярные бренды