NewTom GiANO HR Скачать руководство пользователя страница 56

Страница: 56 / 88

OPERATOR'S MANUAL

6. 3D TOMOGRAPHY (CBCT)

For 3D machines only

The 3D CBCT tomographic examination is obtained by means of 3D reconstruction of the X-rayed anatomical region

and can be consulted through 2D views or 3D representations generated by a program run on a workstation (PC).

Read the NNT software user manual for instructions on the image processing.

Remember to change the disposable infection control sheats before positioning a new patient.

Before positioning the patient, make sure that he/she does not wear metal objects, such as glasses,

removable prosthesis, earrings and any other metal object at the height of the head. If a protective apron is

used against radiation, make sure that the patient’s neck is not covered, otherwise an area not exposed to

the X-ray would be obtained.

The steps to follow to properly perform a 3D examination are:

–

Switching on of system and PC where the acquisition driver is installed

–

Selection of the 3D examination from control console

–

Preparation of the 3D examination

–

Patient positioning

–

3D examination execution

–

Image display and processing

6.1. STARTING THE SYSTEM
Turn the device on by operating the power button placed on the rear side, near the column base: the display will light

up and a sound will be emitted.

If the X-ray device is in Standby mode, press the CONFIRMATION button to restore its functions.

Once it has correctly started, the LED

is blue and steadily on.

An exposure can be performed only if the X-ray device is connected to a PC with the control software
installed.

Содержание GiANO HR

























































































Результаты поиска

Содержание GiANO HR

Отзывы:

Бренды по названию

Популярные бренды

NewTom GiANO HR, Руководство пользователя

Результаты поиска

Содержание GiANO HR

Отзывы:

Бренды по названию

Популярные бренды