NewTek TriCaster TCXD300, Руководство пользователя, Страница: 278 / 290

Page | 262
NTSC
1. If your monitor has a “Blue-gun only” setting, enable it. Depending on the brand of your
monitor, the alternating bars will appear either as light gray and black, or blue and black
(Figure 198).
Figure 198
1. If the monitor lacks a “Blue-gun only” feature, you can obtain a colored filter such as a
Kodak Wratten #47B gel, and hold that between your eyes and the monitor for a similar
result.
2. Tweak the Color (or Saturation ) knob until the small rectangular patches at very bottom
of the tall upper bars on the extreme right and left of your screen merge with the tall
bars above.
3. Tweak the monitor’s Hue control until the small rectangles beneath the third and fifth
tall upper bars likewise blend into bar above.
4. You may need to redo the last two steps several times, balancing the adjustments of
these two controls until all four of the lighter bars evenly match the smaller rectangles
just beneath them. (Note that a perfect match simply may not be possible on some
monitors.)