FieldLiner 3™
ALWAYS wear safety goggles or protective eye-wear when operating the unit!
1700 Jasper St. Unit F, Aurora, CO 80011
T
800.624.6706
F
303.364.7796
•
Newstripe.com
FieldLiner 3™ Manual / 4867.0917
ASSEMBLY
1.
Remove all parts from the packaging boxes.
2.
Loosen the wing knobs on the handle assembly
and then rotate the handles to partially unfold
them.
3.
Position the handle assembly at the back of the
chassis with the cable to the right and the top of
the handle resting on the floor.
4.
Align the holes in the handles with the holes in
the chassis riser (2 positions available). Insert the
four 1/4” bolts through the holes and then
tighten the four 1/4” lock nuts onto them (Pic 1).
5.
Rotate the top section of the handle upward to
the unfolded position and then tighten the wing
knobs (Pic 2).
6.
Insert the support arm into the receiver tube on
the right-hand side of the chassis and then just
through the left side. Secure the support arm
with the two 1/4” thumb screws through the
threaded holes above it.
7.
Slide the gun mount with the gun, onto the
support arm upright. Secure the gun mount with
the large star knob (Pic 3).
Required Items and Tools
7/16” Wrenches and adjustable Crescent Wrenches (2 required)
Your FieldLiner 3™ box should include:
Chassis assembly
Handle assembly
Paint tank assembly
Paint Spray Hose
Spray Gun
Spray Gun Mount with Star Knobs
Support Arm
Parts bag containing:
Support Arm Thumb Screws
Different sized spray nozzles
Handle mounting hardware
Cloth/mesh strainer
Owner’s manual
Pic 1
Pic 2
Paint Hose
Support Arm
Mesh Strainer
Velcro Strap
Handle Mounting
Hardware
Spray Nozzles
Support Arm
Thumb Screws
Page 2 of 8
