FieldLiner 3™
ALWAYS wear safety goggles or protective eye-wear when operating the unit!
1700 Jasper St. Unit F, Aurora, CO 80011
T
800.624.6706
F
303.364.7796
•
Newstripe.com
FieldLiner 3™ Manual / 4867.0917
PRECAUTIONARY WARNING!
Please read and understand all operation instructions as
detailed in this manual. Failure to follow specified instructions
may result in equipment damage or serious injury to personnel
up to and including death!
ALWAYS STRAIN THE PAINT. Field marking paint often has
oversized material, lumps, and debris. If not strained, these
contaminates will be drawn into the hoses and gun, and may
restrict paint flow.
THIN THE PAINT, as per manufacturer’s recommendations prior
to use. Almost all field-marking paints MUST BE THINNED before
use with the FieldLiner 3™. These paints are typically thinned at a
minimum ratio of 1:1. Follow suggested paint thinning
guidelines per the paint manufacturer’s instructions.
NEVER perform maintenance on the machine while the system is
pressurized.
NEVER use any kind of tool to tighten the pump.
NEVER use tools or excessive force to close pump lid.
NEVER pressurize the unit above 35 psi.
Please note that modifying, changing or servicing any portion of
the machine, system or components outside of the procedures
and parts outlined in the owner’s manual will VOID the
warranty.
Always consult your Facility Safety and/or Personnel
Department for specified safety protocols prior to operating
this equipment.
Page 1 of 8
