Newport New Focus Picomotor 8743-CL Скачать руководство пользователя страница 19

Страница: 19 / 133

Specifications

WARNING

Do not apply external DC power to this equipment in excess of

14.5 VDC.

WARNING

Use only the New Focus-supplied MAINS power cord with the

external DC power supply. Use of an under-rated power cord

may cause damage to the product, fire, and/or personal injury.

CAUTION

There are no user serviceable parts inside the Model 8743-CL

Picomotor Controller/Driver. Work performed by persons not

authorized by New Focus will void the warranty.

WARNING

If this equipment is used in a manner not specified in this

manual, the protection provided by this equipment may be

impaired.

WARNING

This instrument is intended for use by qualified personnel who

recognize thermal, shock, or laser hazards and are familiar with

safety precautions required to avoid possible injury. Read the

instruction manual thoroughly before using, to become familiar

with the instrument’s operations and capabilities.

CAUTION

The Model 8743-CL Picomotor Controller/Driver is designed to

be safe when operated under Normal Environmental Conditions

as defined in EN61010-1:2010. Operation under harsher

environmental conditions can result in severe injury.

CAUTION

The case of the Model 8743-CL Picomotor Controller/Driver is

used to dissipate internally-generated heat. Blocking the normal

convective airflow around the unit, or thermally insulating the

unit, can result in severe injury, damage to the product, and/or

fire.

Содержание New Focus Picomotor 8743-CL






































































































































Результаты поиска

Содержание New Focus Picomotor 8743-CL

Отзывы:

Бренды по названию

Популярные бренды

Newport New Focus Picomotor 8743-CL, Руководство пользователя

Результаты поиска

Содержание New Focus Picomotor 8743-CL

Отзывы:

Бренды по названию

Популярные бренды