NewMar SilverLeaf RV-C Control System, Руководство по обучению

Страница: 24 / 67

Page 22
FEATURES AUTO GENSTART CONFIGURATION SCREENS AGS SCREEN 1
The first Autogen Configuration screen is
accessed by pressing the Autogen Configuration
Button located on the Features Configuration
Screen or by pressing the “Prev” Button located
on the second Autogen Configuration screen.
This screen allows you to change the following
settings:
Safety Lock Clear / Locked
When set to Locked this function will inhibit
the generator from automatically starting.
This function is set to Locked when the
Generator Hood is open. Opening the hood
actuates the Safety Lock Switch that is
mounted to the generator mounting frame.
It may be necessary to reset this setting after
accessing the generator.
Press the associated button to change the
setting.
Auto Charger Enabled / Disabled
When Enabled, this function automatically
starts and stops the generator based on the
Auto Charger Configuration Settings (Battery
Voltage, Max Run Time, Top Off Voltage and
Top Off Run Time). Please note that the
generator will not automatically start if Shore
Power is present.
Press the associated button to change the
setting.
Exerciser Enabled / Disabled
When Enabled this function will automatically
run the generator based on the Exerciser
schedule settings on AGS screen 4. This
function will automatically start the generator
regardless of the Shore Power status.
Press the associated button to change the
setting.
Auto Temp Enabled / Disabled
When Enabled this function will automatically
run the generator based on the Auto Temp
schedule settings on AGS screen 5. The Auto
Temp function will automatically start the
generator based solely on temperature. This
function is not triggered by any HVAC system
commands. Please note that the generator
will not automatically start if Shore Power is
present.
Press the associated button to change the
setting.