Newcon Optik NV207-G2, Руководство по эксплуатации

Страница: 16 / 32

12
FIGURE 2
IR illuminator indicator (red,
left), Low battery indicator
(yellow, right, optional)
low battery voltage. For an uninterrupted operation keep a fresh
battery ready and replace it on time. Bright red indicator reminds
the user that the IR illuminator is on
(for more details on illuminator see
6.9).
In the daytime with lens cap on it is
normal to observe a fuzzy image.
Switching on the night vision device
in the daytime is intended for testing
purposes only.
The rotating switch has four
positions: “Off”, “Auto”, “On”,
“IR”. In Auto mode the monocular
will switch off automatically when
turned upright. This mode saves
battery life and allows avoiding
greenish shadow on the face, which may disclose the user.
Note: The “Auto” switch position is optional.
6.3 Switching the unit off
After you have finished using the device, turn it off by rotating
switch (1, Fig.1) to OFF position. Put a protective lens cap on the
lens. Remove the battery from the battery compartment to avoid
any damage of the device in case of electrolyte leakage.
6.4 Adjusting to individual vision
Turn on the device. Direct the device at an object placed within
8-15m from the viewer. Obtain the sharpest image possible on