Newcon Optik NV207-G2, Руководство по эксплуатации

Страница: 18 / 32

14
FIGURE 3
1. “Swing arm” mount
2. Grooved pad
3. Locking knob
4. Unit groove
5. Flip button
6. US clip mount
6.7 Using the unit with headgear or helmet
The unit is supplied with headgear (5, Fig. 1). Prior to using the
headgear adjust its straps so that the headgear fits the head
comfortably but firmly and does not slide off when you are
moving.
The unit is attached to the headgear with a swing arm mount (1,
Fig. 3). To attach the arm mount to the headgear loosen the
tightening screw (8, Fig. 1) on headgear, slide helmet groove (2,
Fig. 3) onto the rail, and then tighten the screw.
To attach monocular to the arm turn the knob (3, Fig. 3), slide the
arm groove (4, Fig.3) along the dovetail platform of the
monocular (10, Fig. 1), and then release the knob.
Technical
drawing of US
clip mount
3
1
6
5
2
4