manualshive.com logo in svg

New Rock Technologies NRP1004 Series, Руководство пользователя

Продукты серии NRP1004 от New Rock Technologies предлагают пользователям высококачественные решения для их потребностей в сетевых технологиях. Вы можете бесплатно загрузить руководство пользователя для NRP1004 на manualshive.com и ознакомиться с полной информацией о продукте.

Поделиться
Скачать
background image

NRP1004 Series IP Phone                                                                        User Manual 

New Rock Technologies, Inc.                                                                                                                                                          5-21 

Name Description 

Keep Alive Type 

Sets the keep alive type. If the value is set to Option, the phone will send an option SIP 
message at a set interval, and the server will send “200OK” in response. If the value is 
set to UDP, the phone will send a UDP message at a set interval to the server. 

Keep Alive 
Interval 

Sets the interval at which the phone sends a message to check whether the server 
operates normally.   

User Agent 

Enables a user agent. 

DTMF Type 

Sets the DTMF sending mode. The value can be: 
DTMF_RELAY 
DTMF_RFC2833 
DTMF_SIP_INFO 
Different VoIP Service providers may use different modes. 

DTMF SIP INFO 
Mode 

Sets the type to 10/11 or * / #. 

Ring Type 

Sets the ring tone for of each SIP line. 

Enable Rport 

Enables/Disables the system to support RFC3581. Via rport is a special way to realize 
SIP NAT. 

Enable PRACK 

Enables or disables the SIP PRACK function, which is specialized for the 

Ringback tone 

(RTB). The default configuration is recommended.

 

Enable Long 
Contact 

Enables the Contact field to contain more parameters. This function is used together 
with SEM services. 

Convert URI 

Converts 

#

 to 

%23

 before sending URI messages. 

Dial Without 
Registered 

Allows proxy-based call without registration. 

Ban Anonymous 
Call 

Disables the anonymous call function. 

Enable DNS SRV 

Supports DNS looking up with sip.udp mode. 

Enable Missed 
Call Log 

Enable the missed call log by it, the phone will save the missed call log into the call 
history record and display the missed calls on the idle screen, or won’t save the missed 
call log into the call history record and display the missed calls on the idle screen. 

Server Type 

Sets the signaling encryption mode or the type of a special server. 

RFC Protocol 
Edition 

Sets a SIP version. If the phone needs to communicate with the gateway enabling with 
SIP 1.0 (such as CISCO5300 ), you need to set the value to RFC2543. The default 
value is RFC3261. 

Local Port 

Sets a port for each SIP line. 

Anonymous call 
Edition 

Enables the phone to make anonymous calls safely. Both RFC3323and RFC3325 are 
supported. 

Keep 
Authentication 

Enables the phone to send a registration message containing an authentication field to 
the server. In this case, the phone does not need to send a separate authentication 
message to the server, and the server is required to respond only to the registration 
message, which simply the operation process 

Ans. With A 
Single Codec 

Enables the phone to respond to the SIP message with just one codec supported. 

Auto TCP 

Enables the phone to automatically use TCP for message transport in the scenario 
where the message size exceeds 1300 bytes. 

Enable Strict 
Proxy 

Enables the phone to be compatible with special SIP servers. In composing the 
message in response to the server, the phone uses the source IP address of the server, 
not the IP address in the 

via

 field of the message received. 

Enable GRUU 

Enables the phone to support GRUU. 

Содержание NRP1004 Series






























































































Отзывы:

Нет отзывов

Похожие инструкции для NRP1004 Series

Icemobile TWISTER User Manual preview
TWISTER
Бренд: Icemobile Страницы: 75
Icemobile ACQUA User Manual preview
ACQUA
Бренд: Icemobile Страницы: 36
Nec Casio DT700 User Manual preview
DT700
Бренд: Nec Casio Страницы: 390
Sagem MYX-4 User Manual preview
MYX-4
Бренд: Sagem Страницы: 97
Sagem myC5-2 Owner'S Manual preview
myC5-2
Бренд: Sagem Страницы: 99
Sagem MYC-4 User Manual preview
MYC-4
Бренд: Sagem Страницы: 99
Sagem myX-6 User Manual preview
myX-6
Бренд: Sagem Страницы: 89
Samsung GT-I6410 User Manual preview
GT-I6410
Бренд: Samsung Страницы: 72
Samsung GT-I8510/8 Quick Start Manual preview
GT-I8510/8
Бренд: Samsung Страницы: 33
Sony Ericsson TM717 Equinox Environmental Declaration preview
TM717 Equinox
Бренд: Sony Ericsson Страницы: 2
Kyocera Qua Phone Settings Manual preview
Qua Phone
Бренд: Kyocera Страницы: 2
Kyocera Rave K-7 User Manual preview
Rave K-7
Бренд: Kyocera Страницы: 56
TTS Mini Mobile Phones User Manual preview
Mini Mobile Phones
Бренд: TTS Страницы: 8
B Mobile HK QW130 Use Manual preview
QW130
Бренд: B Mobile HK Страницы: 43
FLY Levi'S EF80 User Manual preview
Levi'S EF80
Бренд: FLY Страницы: 61
DMP Electronics iComSL Programming And Installation Manual preview
iComSL
Бренд: DMP Electronics Страницы: 46
ASCOM Myco 2 User Manual preview
Myco 2
Бренд: ASCOM Страницы: 112
OUKITEL U7 Plus User Manual preview
U7 Plus
Бренд: OUKITEL Страницы: 39

Бренды по названию

Популярные бренды

Загрузить еще бренды